Relco LED Emergency Kit RP0714CP3

The electronic emergency lighting system (RP0714CP3) is designed to be incorporated into any ceiling lamp and set up to supply power LED to current controlled LED modules with normal mains voltage (220/240 -50/60Hz). It can be connected for permanent or non-permanent operation with any type of current-controlled electronic power supply unit (not supplied) for LEDs. 

Its main characteristic is that it supplies constant power (3,5W) to the connected LED load, regardless of its working voltage, provided it is between 15...52 Volt; this means there is no need to worry about selecting the output voltage range, the emergency system will adapt the output current supplied to the LEDs so as to always supply 3w in an emergency. In addition, RP0714CP3 is equipped with self-test function, so any malfunction is indicated by the red/green LED provided: LED light (6.5 mm fixing hole) The length of the LED indicator cable is 600mm. 

FOR USE ONLY WITH FITTINGS WITH A DRIVER
WILL NOT WORK WITH DRIVER ON BOARD FITTINGS
MIN VOLTAGE OUT 15
VOLT OUT MAX 52V
3.5WATT MAX
AUTOTEST