UD100 Universal Inline Dimmer Trailing Edge 1-100W

Unique Profile

Du0™ (UD100+ ZERO, 0 Watt Transformers) generates a unique profile of phase angle control of 12VAC LED lamps. 

The result is that 100% of dimmable 12VAC LED lamps and 99% of non-dimmable. 12VAC lamps are dimmed in an excellent manner.

In addition, UD100 +ZERO 35 fits in a wall box

The low power dimmer UD100 can be controlled by one or several push buttons (toggle switches). The advantage with the push-button dimmer concerns the unlimited numbers of locations from where the dimming of the environment can be controlled. 

• Starts dimming from 1W
• Can be installed in a small junction box behind the pushbutton
• Can be installed with the usage of screw attachment
• For dimming LED from 1W up to 100W (E14, E27, GU10)
• For dimmable low energy lamps from 1W up to 100W (E14, E27, GU10)
• For 230V halogen lamps up to 100W
• For dimmable LED-Drivers from 1W up to 100W
• For low voltage halogen up to 100W over electronic transformers for trailing edge control
• For incandescent lamps up to 100W
• With adjustable lowest dimming level, which is useful for fluctuating loads-low energy, LED or incandescent lamps
• With memory function, allowing the dimmer to maintain the latest selected light intensity at off-/on also valid when the dimmer has been without voltage
• Dimmable with several parallel connected pushbuttons
• With soft start
• With overheating protection
• Multiple UD100 can not be controlled by single pushbutton
• Pushbutton with signal lamp can not be used

Operation

Off/On- A gentle and quick push. The dimmer is turned on with the latest selected light intensity (memory function).

Dimming up/down - Gently press and keep pushing until desired light intensity is obtained.